Battery operated Floor Cleaning Machine 

for Cleaning, Scrubbing, Stripping, and Polishing

Doodle Scrub EBG-9: SS P0511DRIVER

The White Driver Pad is primarily a spacer pad. Just 1/4″ thick, use this pad with sandpaper and diamonds . Always check spacer and driver pads frequently for wear and replace as needed.

Doodle Scrub EBG-9: SS P0511BLU

The Blue Driver Pad is a medium to heavy duty blue pad can be used for heavier cleaning and buffing situations, but primarily used as a spacer pad. Use wet or dry on VCT and tile.

Doodle Scrub EBG-9: SS P0511RED

The Red Driver Pad is a light duty red pad produces best results in a light cleaning and buffing situation. Primarily used as a spacer pad. Use wet or dry on VCT and tile.

Doodle Scrub EBG-9: SS P0511WHT

The White Pad is used as a light duty polish pad. The 1″ thick pad is used without a driver pad, and is great for spreading chemicals while buffing.

Doodle Scrub EBG-9: SS P0511TITAN

The Titan Pad displays superior chemical resistance vs. competitive pad. It has substantial abrasive content for aggressive finish removal. Durable, with extended cut life comparative to the leading heavy duty strip pad, and more aggressive than our SHO pad.

Doodle Scrub EBG-9: SS P0511TGBV

The 3D Scrub Tile & Grout Pad is best on grouted tile floors, but can be used very effectively on terrazo, poured non-slip, concrete, LVT and other uneven floors.
Use wet on several surfaces.

Doodle Scrub EBG-9: SS P0511SQP

The SQP Pad is a thin pad designed to remove floor finish without chemicals. Remove several layers of acrylic finish to prep for recoating. USE dry or wet on VCT and tile.

Doodle Scrub EBG-9: SS P0511SHO

The SHO Pad should be used only for the heaviest of chemical stripping jobs. Extremely abrasive and heavy with dense fibers. Best when dirt and buildup are severe.
Use wet on VCT and tile.

Machine Maintenance

Prior to Using (Daily)

  DO NOT operate equipment while the charger is still connected.
•  Check grip face and driver pad.  Inspect for wear and debris.  

After Use (Daily)

• Clean pad and base plate assembly.  Replace pad as needed.
• Remove debris between pad and base plate.
• Wipe entire unit with a damp microfiber cloth.
• Make certain a pad is placed on the grip face.  NEVER allow the machine to sit on the grip face without a pad.


We decided to use the Doodle Mop. You will understand why, once you see the dirt that comes off the floor.

Terry Pellerin
Associate Director of Facilities, Worcester Polytechnic Institute

After seeing the results, I was no longer skeptical and wished we started using it sooner

Chris Rhodes

We were able to strip and finish all of our 1st floor halls in 3 days using the square scrub

John Rota
CHESP, Director, Environmental Services Concord Hospital